Talk Around (Talk); Time Out Timer (Tot); Tx Stop (Txstop); Vox (Vox) - Leixen VV898 User Manual

Hide thumbs Also See for VV898:
Table of Contents

Advertisement

Talk Around (Talk)
Enable
talk
around
function,
transmittmg
and
receiving frequencies become the same; transmit and
receive signaling also turn into the same signaling.
Users can access menu 43 to select Open (ON) or
close (OFF). Default:
OFF.
Time out timer (TOT)
Users can set the maximum time which the radio is
allowed to continuous transmitting. The radio would
beep "toot" tone to warning and stop transmitting.
Transmitting symbol would not be showed on screen.
Enable TOT function would prevents the radio from
damage by uncertainty
transmit.
Access Menu 44,
press M key and press
"CHA+/CHA-/vOL+/vOL-"
to select TOT time, and then press M key to confirm
and
exit.
Range: OFF(disabled)
110120/30
...
120
(Step:
10 seconds). Default: 30 seconds.
TX Stop (TXStop)
Users can set to inhibit the radio transmitting. The
radio can only receiving signal but can't transmitting
signal when TX Stop enable. When TX stop enable,
the radio would beep "toot" warning tone and won't
do transmitting when PTT key is pressed. And the
35
screen display "TX Stop". Access Menu 45, press M
key and rotating to select enable (ON) or disable
(OFF). Press M key again to confirm and
exit.
Default:
off.
VOX (VOX)
Enable VOX function, you can do transmitting
without pressing PTT key, transmission can be carried
out when you speak and end when the speaking is
over. Access Menu 46, select VOX enable (ON) or
disable (OFF).
m!D
would be displayed on screen
when VOX function is enabled. Default:
OFF.
VOX S(Sensitivity): VOX sensitivity is an analog
reference level used to set internal VOX threshold of
the CPU in the
radio.
Considering the different speak
volume and tone of every person, user should test to
get a best sensitivity level according to his own voice.
User can select VOX sensitivity through Menu 47.
Range: 1 - 8 (step: 1). Default: 3.
VOX D(Delay): The radio recovers reception mode
too fast that the last voice of VOX might not be
transferred. User can set VOX Delay through Menu
48 to avoid this problem. Range: 1-4 seconds (step: 1).
Default: 3 sec.
36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents