High/Low Power Set (Power); Ptt Id (Ptt Id) - Leixen VV898 User Manual

P2 Long Press: MOLO (Monitor Lock)
P2 Short Press: Bandchange(Change band)
P3 Long Press: SCAN (scan)
P3 short Press: MUTE (mute)
M Short Press: Enter the menu function
identity.
Caller can program with software to set whether to
enable voice broadcast PTT ID code. If you enable
voice broadcast PTT ID is sent to the recipient via
voice, receiver would hear caller's PTT ID
broadcasted such as "123". Voice broadcast can only
broadcast up to five numbers. If the caller's voice
broadcast mode is disable, the receiver can only
display via PTT ID code identifying the caller identity.
Receiver must be set "Display PTT ID" ticked through
software to display the PTT ID. "Display PTT ID" can
be set up to display 14 numbers.
ON / OFF PTT ID function:
ON / OFF PTT ID function in two ways:
1 In VFO / MR mode, Choose the frequency or
, channel which need to open PTT ID function,
press M and press "CHA+/CHA-NOL+NOL-" to
menu 31 to enter the PTT ID menu, select ON to
open or OFF to close.
Note:
a), In CH mode, can not switch on / off PTT ID
function.
b), In MR mode, each memory channel can be set
individually on / offPTT ID function.
2, Write the channel in the programming software
directly whether to enable PTT ID function.
High/Low Power Set (Power)
User can choose High power or Low power for the
communication according to the distance through
Menu 30. Please choose Low power when the
communication is nearby to reduce radiation and save
electricity. Choose High Power when the
communication is far away to ensure the
communication quality. Default: High power.
PTT ID (PTT ID)
Do you often because there are too many team
personnel, and their voice through radio sound alike,
do not know who's calling and bothered? Set Enable
PTT ID function can help you solve this problem.
PTT ID function is used to identify the identity of the
caller. PTT ID function is enabled, the receiver can be
informed the Caller ID through receive the voice
broadcast of PTT ID from the caller; if the caller do
not want to be identified, select disable PTT ID, then
the recipient will not be able to identify the caller
27
28