Wireless Change Frequency; Rx Inhibit/Rxtx Inhibit - Leixen VV898 User Manual

a), .Manually change frequency: Transfer a signal to
notify the other 9 radios ready to changing
frequency. The receiver presses the shortcut key of
"OFF" to start "wireless change frequency", screen
appears an icon
"F",
then administrator changing
frequency following step 6. Icon
"F"
would
disappear when changing successful, users can
switch to the new channel for communication.
b), Automatically changing frequency: Transfer a
signal to notify the other 9 radios ready to changing
frequency. Administrator sends enable code to start
"wireless change frequency", screen appears an
icon
"F",
then administrator changing frequency
following point 6. Icon
"F"
would disappear when
changing successful, users can switch to the new
channel for communication.
6, Changing operation: Administrator presses "Call"
key on DTMF microphone (Key A for the supplied
DTMF microphone), screen appears "Send 01", press
"CHA+/CHA-NOL+NOL-"
to the channel stored in
advance such as "03", press PTT key to transfer the
first code, press "call" key again, screen appears
"Send 03", now then" 03 "can not be modified, press
PTT key to send the second code. If icon
"F"
disappears now that means the operation is successful
other it is unsuccessful. Administrator should redo the
operation.
45
RX Inhibit/RXTX Inhibit
RX Inhibition: The radio can't transfer any signal
when it receives a code match a RX Inhibition codes
until it receives an enable RX codes. If a radio is RX
inhibit, the radio would not display transmitting
symbol when press PTT key, and issue a "toot" tone.
RXTX Inhibition: The radio can't receive or transmit
any signal when it receives a code match a RXTX
Inhibition codes until it receives an enable RXTX
codes. If a radio is RXTX inhibit, the radio would
display transmitting symbol but can't hear anything
when receive a signal, and it would not display
transmitting symbol when press PTT key, issue a
"toot" tone.
RX inhibit and RXTX inhibit code: Optional 0-15 bit
characters. Range: 0-9, A-D,
*
and #
RX inhibit IRXTX inhibit and activation:
RX inhibit IRXTX inhibit methods:
1, Program the radio without RX inhibit activation
IRXTX inhibit activation ticked through software, the
radio is RX inhibit IRXTX inhibit. If it is ticked, RX
inhibit activated IRXTX inhibit activated.
2, Enter a RX inhibit IRXTX inhibit code in software,
and then programming the radio with software. With
46