Table of Contents
Advertisement
"CHA+/CHA-" or "VOL+/VOL-" keys to select
"Menu 1 FUN RES". Press the M key again and the
screen will display "RESET". Press the M key a third
time, and the screen will display "Waiting". When the
transceiver restarts, the reset is complete. Note: You
may cancel the reset by pressing any key other than
the "M" key when the "Reset?" prompt appears.
Programming Operation
Lease Function
The Lease function can be set to limit how long a
transceiver can be used. When the Lease Time expires,
the transceiver will no longer operate, and the
indicator LED will light continuously red. At this
point, the user may only turn the transceiver power off.
This function can only be reset with the VV-898
programming software.
Remaining time: You can set the transceiver to display
the time remaining for the transceiver lease. If the
Lease function is enabled using the programming
software, the startup display can be set to display the
remaining lease time.
Lease Time: You may set the transceiver Lease Time
through the programming software. The valid Lease
Time range is from 1 minute to 255 days 24 hours,
and 59 minutes.
48
Advertisement
Table of Contents
