Times Oftx Per Minutes Set; Maintenance; Base Knowledge; Maintain And Clean - Leixen VV898 User Manual

DTMF function enable, press "Call" key and the code
by another radio and press PIT key to transfer it, the
radio received the code and issued a "toot" tone,
means the radio is RX
IRXTX
inhibit. Press PIT key
and enter RX
IRXTX
code and
"*,, key
to activate RX
IRXTX
inhibit.
Note: If "Activation Enable" hasn't been checked, the radio
can't be activated through transfer code, it can only be
activated through software.
Times of TX per Minutes Set
Per minute call (times): User can set times of TX per
minutes to limiting transfer times to prevent
individual user transfer frequently, occupation of
channel. Range: 0-255 (0 for no limit times of calls).
Default: O. The radio would issue a "toot" tone to
alarm PTT times have reached defined times. The
radio would not display transmitting symbol when
press PTT key.
47
Maintenance
Base Knowledge
The radio has been strictly calibrating test in the
factory, it meets the target requirements.
Non-professional maintenance staff is not allowed to
take apart the radio to repair and calibration without
authorized, otherwise no warranty.
Maintain and Clean
1, Handle with care to the radio, do not carry the radio
by power cable or antenna ..
2, Wipe dust and dirt on the radio regularly with cloth.
3, Do not store the radio in too hot or too cold
environment. It would reduce the life of the radio.
4, In long-term use, the keys, keys and body would
become dirty, please using neutral detergent and a
damp cloth to clean (Do not use strong corrosive
chemicals). Using such as alcohol, oil or spray
chemical agents may cause damage to the radio shell.
5, Please use supplied or approved antenna.
Unauthorized antennas or modifications accessory
could damage the radio and violate regulations
governing radio devices.
6, Please have your radio repair before necessary data
48