Using the Front Panel Keypad
Key and Indicator Legend
Items
(1) POWER
LED
(2) ALARM
LED
(3) Program
LED
(4) RUN LED
(5) Monitor
LED [Hz]
(6) Monitor
LED [A]
(7) Run
command LED
(8) 7-seg LED
(9) Run key
(10) Stop/reset
key
(11) ESC key
(12) Up key
(13) Down key
(14) SET key
(15) USB
connector
Inverter Keypad Description
Contents
Turns ON (Green) while the inverter is powered up.
Turns ON (Red) when the inverter trips.
Turns ON (Green) when the display shows changeable
parameter.
Blinks when there is a mismatch in setting.
Turns ON (Green) when the inverter is driving the motor.
Turns ON (Green) when the displayed data is frequency related.
Turns ON (Green) when the displayed data is current related.
Turns ON (Green) when a Run command is set to the operator. (Run
key is effective.)
Shows each parameter, monitors etc.
Makes inverter run.
Makes inverter decelerates to a stop.
Reset the inverter when it is in trip situation
Go to the top of next function group, when a function mode is
shown
Cancel the setting and return to the function code, when a
data is shown
Moves the cursor to a digit left, when it is in digit-to-digit
setting mode
Pressing for 1 second leads to display data of d001,
regardless of current display.
Increase or decrease the data.
Pressing the both keys at the same time gives you the digit-to-
digit edit.
Go to the data display mode when a function code is shown
Stores the data and go back to show the function code, when
data is shown.
Moves the cursor to a digit right, when it is in digit-to-digit
display mode
Connect USB connector (mini-B) for using PC communication
Ii