Add And Install The Wireless Devices - EMS firecell Setup Manual

4 Add and Install the Wireless Devices

www.emsgroup.co.uk
Wireless Detector Base
IDENT
PRESS HERE TO
LOG ON
The Wireless Devices can be added to their relevant RCCs, either by pressing the
device's log on buttons or by entering the device's unique ident number. If
adding by ident, always make a note of the devices ident numbers and device
type prior to installation and refer to the Programming Manual (MK98) for
further details.
Note: Ensure the Wireless Devices are powered before logging on to the system.
See the relevant installation guide for more information.
To add devices by log on;
Add New Device Select Desired RCC 01 Set Loop 1
From Front Display
. Addr 003 Add By Log On Press Dev Log On 'press the devices
log on button, followed by Add Dev 03456 Y? New Addr L1 A003.
To Exit
BACK
The device has now been added to the Radio Hub and should be installed in its
location, prior to the next step of assigning the device to its relevant RCC. See
the relevant devices installation instructions, for more information.
6