Ups Does Not Provide The Expected Backup Time; Ups Frequently Switches Between Utility And Battery Power - HPE R/T3000 G2 User Manual

UPS does not provide the expected backup time

Action:
If the Overload LED
1.
devices to reduce the power requirements.
Power down the UPS
2.
Allow the UPS batteries to charge for 24 hours.
3.
Initiate a self-test
4.
During extended power outages, save your work, power down the load devices, and then power
5.
down the UPS
UPS frequently switches between utility and battery
power
Action:
Check the input voltage and reconfigure the UPS
1.
Contact a qualified electrician to verify that the utility power is suitable for the UPS.
2.
("UPS front panel
("Powering down the
("Initiating a self-test" on page 43).
("Powering down the UPS" on page 44) to conserve battery power.
controls" on page 7) is illuminated, remove one or more load
UPS" on page 44).
("Configuring the UPS" on page 42).
Troubleshooting 59