Attaching The Ups Front Bezel; Connecting The Host Computer - HPE R/T3000 G2 User Manual

Attaching the UPS front bezel

Connecting the host computer

CAUTION: Only one communications port can be connected to the host computer.
Connecting more than one will result in unexpected UPS behavior. If an option card is installed,
the serial and USB communications ports are automatically disabled.
Connect the UPS to a host computer using either the USB cable or the DB9 serial cable included with the
UPS. Install HPE Power Protector on the host computer. See the Hewlett Packard Enterprise website
(http://www.hpe.com/info/rackandpower) to download the latest version.
NOTE: To install and configure the software, see the software user guide. The software user
guide is available for download from the Hewlett Packard Enterprise website
(http://www.hpe.com/info/rackandpower).
Installation 19