Updating The Ups Firmware; Configuring A Usb To Serial Converter - HPE R/T3000 G2 User Manual

Remove the two screws securing the option card and slide the card out.
3.
To replace the component, reverse the removal procedure.
NOTE: Replacing the option card might require power protector software to be restarted or
reconfigured.

Updating the UPS firmware

To update the UPS firmware, see the Hewlett Packard Enterprise website
(http://www.hpe.com/info/rackandpower).

Configuring a USB to serial converter

NOTE: This procedure was tested on the Windows
2003, and Windows
(part number 304098-001). Depending on your system configuration, a driver download might
be required to successfully install the converter. The driver can be downloaded from the
USB-Drivers website (http://www.usb-drivers.com/drivers/123/123294.htm).
To configure a USB port to the COM 1 port on systems that do not have available serial ports:
Connect the USB to serial converter to the USB port on your system.
1.
For Windows Vista, click Start, select Control Panel, double-click System and Maintenance, and
2.
then skip to step 4.
-or-
For Windows XP, click Start, select Control Panel, click Performance and Maintenance, and then
click System.
-or-
For Windows Server, click Start, select Control Panel, and then double-click System.
Click the Hardware tab.
3.
Click Device Manager. The Device Manager screen appears.
4.
In the tree displayed in the left panel, click the Ports (COM & LPT) branch to expand.
5.
Vista Enterprise operating systems using the USB to serial converter
®
XP Professional, Windows Server
® ®
Maintenance 50