Start Up - Siemens Milltronics BW100 Instruction Manual

Start Up

Program P005 - P017
Maneuvering
refer to
on page 18 for
parameter selection
and changing values.
* from design data
sheet, if provided
for constant speed
#
applications, TB1 - 5/6
jumpered, value is
locked at 100.
Page 24 Milltronics BW100 - INSTRUCTION MANUAL
program mode P005, units
e.g. 1, t/h
P011, design rate *
e.g. 200 t/h
P014, design speed *
e.g. 0.5 m/s
P015, speed constant *
#
e.g. 100.3 pulse / m
P016, belt length
e.g. 65.72 m
P017, test load *
e.g. 55.56 Kg / m
Examples are typical
7ML19985DJ01