Parameter assignment
6.3 Start up delay
6.3
Start up delay
6.3.1
Start up delay (P001)
For relay outputs Q1 and Q3 from probe A input, Input 2 must have an enable function.
Note
Typically used for a slow speed process, but also compatible with standard operating
functions.
Enable to have a start up delay in seconds (0 to 399), delay allows process to get to
operational speed before a relay output will be generated.
When value = > 0 then output relays are maintained (Hi) for the set time period to allow
system to achieve process speed.
Values
34
Start up delay = ON
I2 = Hi (active Hi transition from Lo – Hi)
Input I2 = 1 Enable (momentary transition from Lo - Hi – Lo)
Input I2 = 0 Disabled
SITRANS WM300 MFA
Operating Instructions, 08/2018, A5E45090709-AA