Icom IC-7300 Basic Manual page 44

4
RECEIVING AND TRANSMITTING
Operating CW (Continued)
D Electronic Keyer function
You can set the Memory Keyer function settings,
paddle polarity settings, and so on of the Electronic
Keyer.
1. Open the KEYER screen in the CW mode.
» KEYER
MENU
You can select [KEYER] on the MENU screen only in
the CW mode.
2. Touch [EDIT SET].
• Opens the EDIT SET screen.
KEYER screen
3. Select the desired item to set.
EDIT SET screen
4. To close the KEYER screen, push
times.
D
function is OFF, you can listen to the CW side tone
without actually transmitting.
Information
• This enables you to match your transmit frequency
exactly to another station's by matching the audio tone.
• You can also use the CW side tone (make sure the
sending.
• You can adjust the CW side tone level in "Side Tone
Level."
» KEYER
MENU
EXIT
EXIT
several
EDIT SET CW-KEY SET
EDIT
001 SET
Rotate
Push
4-14
You can edit the Keyer memories.
You can set the number style, count
up trigger, and present number.
You can set the memory keyer
repeat time, dot dash ratio, paddle
polarity, key type, and so on.