Icom IC-7300 Basic Manual page 10

1
PANEL DESCRIPTION
Front panel (Continued)
@0 MEMO PAD KEY
MPAD
Sequentially calls up the contents in the Memo
Pads, or saves the displayed contents into the
Memo Pad.
@1 VFO/MEMORY KEY
Switches between the VFO and Memory mode, or
copies the memory channel contents to the VFO.
@2 CLEAR KEY
CLEAR
Clears the RIT or TX shift frequency.
@3 A/B KEY
A/B (p. 3-1)
Switches between VFO A and VFO B, or sets the
selected VFO's frequency to the other VFO.
@4
TX
TX KEY (p. 4-8)
Turns the TX function ON or OFF.
@5 RIT KEY
RIT
(p. 4-1)
Turns the Receiver Incremental Tuning (RIT)
function ON or OFF.
@6 SPLIT KEY
SPLIT
(p. 4-10)
Turns the Split function ON or OFF.
@7 MULTI-FUNCTION CONTROL
Displays the Multi-function menu for various
adjustments, or selects a desired item.
#4 #3 #2 #1 #0
V/M
(p. 3-1)
MULTI
(p. 1-6)
@9 @8 @7 @6
@8 TRANSMIT FREQUENCY CHECK KEY
(p. 4-8)
Enables you to monitor the transmit frequency while
holding it down in the Split mode.
@9 TX/RX INDICATOR (p. 3-9)
Lights red while transmitting and lights green while
receiving.
#0 NOISE REDUCTION KEY
Turns the Noise Reduction function ON or OFF.
#1 NOTCH KEY
NOTCH
#2 TWIN PASSBAND TUNING CONTROL
(p. 4-3)
#3 PREAMP/ATTENUATOR KEY
Turns ON or OFF, and selects one of two receive
#4 NOISE BLANKER KEY
Turns the Noise Blanker ON or OFF.
1-2
@5 @4 @3
@2
@1
@0
NR
(p. 4-6)
(p. 4-6)
TWIN PBT
P.AMP
ATT
NB
(p. 4-5)
XFC
CLR
(p. 4-1)