Icom IC-7300 Basic Manual page 40

4
RECEIVING AND TRANSMITTING
Split fre uency operation
Split frequency operation enables you to transmit
and receive on different frequencies in the same or
different bands.
Transmit frequency
Receive frequency
D
The Quick Split function enables you to automatically
equali e the frequency and mode of VFOs to the
displayed VFO, and activate the Split function.
1. Set VFO A's receive frequency and operating
mode.
2. Hold down for 1 second.
SPLIT
• The Quick Split function is turned ON and the VFO A
•
corner of the main screen.
3. While holding down
frequency offset between transmit and receive.
The offset between transmit and receive
while holding down
21.2 000 MH Receive frequency
21.31000 MH Transmit frequency
Displayed
frequency is
displayed
XFC
, set the operating
XFC
.
There are 2 ways to use the Split frequency operation.
• Use the Quick Split function
• Use the receive and transmit frequencies set to VFO
VFO A
VFO B
D
1. Set VFO A's receive frequency and operating
mode.
2. Push A/B
frequency and the operating mode.
3. Push SPLIT
SPLIT
Pushing
4. Push A/B to return to VFO A.
The Split frequency operation is ready.
4-10
to turn ON the Split function.
turns the Split function ON or OFF.
Displayed
VFO A
frequency is
displayed