Thank you for choosing this Icom product. The IC-7300
state of the art technology and craftsmanship. With proper care, this product should provide you with years of
trouble-free operation. We appreciate you making the IC-7300 your transceiver of choice, and hope you agree
your IC-7300.
READ ALL INSTRUCTIONS carefully completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL— This
instruction manual contains full operating instructions
for the IC-7300.
FEATURES
• RF Direct Sampling System
The IC-7300 employs an RF direct sampling system.
RF signals are directly converted to digital data and
processed in the FPGA. This system is a leading
technology marking an epoch in amateur radio.
• Real-Time Spectrum Scope
The spectrum scope is class-leading in resolution,
sweep speed and dynamic range. When you touch the
scope screen on the intended signal, the touched area is
intuitive operation.
• New "IP+" Function
The new IP Plus function improves 3rd order intercept
point (IP3) performance. When a weak signal is received
optimized against signal distortion.
• Class Leading RMDR and Phase Noise
Characteristics
Phase Noise characteristics are also improved about
IC-7200.
• A 4.3 inch touch panel color display
• A built-in automatic antenna tuner
• Multi-function control for easy settings
WORD
Personal death, serious injury or an
R DANGER!
explosion may occur.
Personal injury, fire hazard or electric
R WARNING!
shock may occur.
CAUTION
Equipment damage may occur.
Recommended for optimum use. No
NOTE
risk of personal injury, fire or electric
shock.
DEFINITION
HF/50 MHz TRANSCEIVER
Hand microphone
ACC plug
(13 pin)
CW key plug
Speaker plug
not be supplied depending on the transceiver version.
licensed according to the software license.
and is licensed according to the open source
software license.
and is licensed according to the open source
software license.
software being used by this product.
i
is designed and built with Icom's
Spare fuse
Spare fuse
(5 A)
(25 A)
Spare fuse
(30 A)
Need help?
Do you have a question about the IC-7300 and is the answer not in the manual?