The Static Dhcp Screen - ZyXEL Communications P-660HN-51 User Manual

Table 23 Network Settings > Home Networking > LAN Setup (continued)
LABEL
DHCP Server Lease
Time
Days/Hours/Minutes
DNS Values
DNS
DNS Server 1
DNS Server 2
Apply
Cancel

7.3 The Static DHCP Screen

This table allows you to assign IP addresses on the LAN to specific individual computers based on their
MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned
at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Use this screen to change your Zyxel Device's static DHCP settings. Click Network Settings > Home
Networking > Static DHCP to open the following screen.
Figure 38 Network Settings > Home Networking > Static DHCP
The following table describes the labels in this screen.
Table 24 Network Settings > Home Networking > Static DHCP
LABEL
Add new static
lease
#
Status
Chapter 7 Home Networking
DESCRIPTION
This is the period of time DHCP-assigned addresses is used. DHCP automatically
assigns IP addresses to clients when they log in. DHCP centralizes IP address
management on central computers that run the DHCP server program. DHCP
leases addresses, for a period of time, which means that past addresses are
"recycled" and made available for future reassignment to other systems.
This field is only available when you select Enable in the DHCP field.
Enter the lease time of the DHCP server.
This field is only available when you select Enable in the DHCP field.
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Select Dynamic if you have the Dynamic DNS service.
Select Static if you have the Static DNS service.
Enter the first and second DNS (Domain Name System) server IP address the Zyxel
Device passes to the DHCP clients.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click this to add a new static DHCP entry.
This is the index number of the entry.
This field displays whether the client is connected to the Zyxel Device.
P-660HN-51 User's Guide
95