ZyXEL Communications P-660HN-51 User Manual page 246

• If you have a static IP address click Use the following IP address and fill in the IP address, Subnet
mask, and Default gateway fields.
• Click Advanced.
Figure 145 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
If you do not know your gateway's IP address, remove any previously installed gateways in the IP
8
Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
• In the IP Settings tab, in IP addresses, click Add.
• In TCP/IP Address, type an IP address in IP address and a subnet mask in Subnet mask, and then
click Add.
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the IP Settings tab by clicking Add in Default gateways.
• In TCP/IP Gateway Address, type the IP address of the default gateway in Gateway. To manually
configure a default metric (the number of transmission hops), clear the Automatic metric check
box and type a metric in Metric.
• Click Add.
• Repeat the previous three steps for each default gateway you want to add.
• Click OK when finished.
Appendix A Setting up Your Computer's IP Address
P-660HN-51 User's Guide
246