ZyXEL Communications P-660HN-51 User Manual page 42

In the following figure, router R is connected to the Zyxel Device's LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to
computer B (in N2 network), the traffic is sent to the Zyxel Device's WAN default gateway by default. In
this case, B will never receive the traffic.
N1
A
You need to specify a static routing rule on the Zyxel Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the Zyxel Device routes traffic from A to R and then R routes the
traffic to B.
N1
A
This tutorial uses the following example IP settings:
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER
The Zyxel Device's WAN
The Zyxel Device's LAN
A
R's N1
Chapter 4 Tutorials
R
R
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
P-660HN-51 User's Guide
42
N2
B
N2
B