ZyXEL Communications P-660HN-51 User Manual page 49

The following table describes the labels in this screen.
Table 5 Network Settings > Broadband
LABEL DESCRIPTION
Add new WAN Click this button to create a new connection.
interface
# This is the index number of the entry.
Status This is the status of the connection.
Name This is the service name of the connection.
Encapsulation This is the method of encapsulation used by this connection.
VPI/VCI This is the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers
configured for this WAN connection.
ATM QoS This is the type of ATM QoS of the connection.
IGMP Proxy This shows whether the Zyxel Device act as an IGMP proxy on this connection.
NAT This shows whether NAT is activated or not for this connection.
Default Gateway This shows whether the Zyxel Device use the WAN interface of this connection as
the system default gateway.
Modify Click the Edit icon to configure the WAN connection.
Click the Delete icon to remove the WAN connection.
Chapter 5 Broadband
P-660HN-51 User's Guide
49