Zyxel Device Access And Login - ZyXEL Communications P-660HN-51 User Manual

30.2 Zyxel Device Access and Login

I forgot the IP address for the Zyxel Device.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address of the Zyxel Device by
2
looking up the IP address of the default gateway for your computer. To do this in most Windows
computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway
might be the IP address of the Zyxel Device (it depends on the network), so enter this IP address in your
Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
I forgot the password.
The default admin password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the Zyxel Device.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide.
Make sure your Internet browser does not block pop-up windows and has JavaScript and Java
3
enabled. See
Reset the device to its factory defaults, and try to access the Zyxel Device with the default IP address.
4
See Section 1.7 on page
If the problem continues, contact the network administrator or vendor, or try one of the advanced
5
suggestions.
Advanced Suggestions
Chapter 30 Troubleshooting
(Section 7.2 on page
Appendix on page 256.
18.
P-660HN-51 User's Guide
93), use the new IP address.
225
Section 1.7 on page 18.
Section 1.7 on page 18.
I