Windows Vista - ZyXEL Communications P-660HN-51 User Manual

Figure 138 Windows XP: Internet Protocol (TCP/IP) Properties
Click OK to close the Internet Protocol (TCP/IP) Properties window.
8
Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window.
9
Close the Network Connections window (Network and Dial-up Connections in Windows 2000/NT).
10
11 Turn on your Zyxel Device and restart your computer (if prompted).
Verifying Settings
Click Start, All Programs, Accessories and then Command Prompt.
1
In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open Network
2
Connections, right-click a network connection, click Status and then click the Support tab.

Windows Vista

This section shows screens from Windows Vista Enterprise Version 6.0.
Click the Start icon, Control Panel.
1
Appendix A Setting up Your Computer's IP Address
P-660HN-51 User's Guide
243