Insert Tools, Accessories - Hilti SF(H) 14-A Operating Instructions Manual

LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
en
LED 1
-
-
2.10 Power tool overloading and overheating indicator
The power tool is equipped with an electronic protection system to prevent
overloading and overheating. The power tool switches itself off automatically
in the event of overloading and overheating. After releasing the control
switch, the power tool may not restart immediately when the switch is
pressed again (while the power tool is cooling down).
LEDs light constantly
-

3 Insert tools, accessories

Designation
Bit holder
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Belt hook (optional)
Designation
Keyless chuck clamping range
Drilling diameter range in wood
(soft) (auger bits)
6
Printed: 30.09.2013 | Doc-Nr: PUB / 5071630 / 000 / 02
LEDs blink
-
-
-
-
LED 1
LED 1
LEDs blink
LED 1,2,3,4
Short designation
S-BH 50
C 4/36
C 4/36­ACS
C 4/36-ACS TPS
C 4/36­90
C 4/36­350
B 14/3.3 Li­Ion
Description
∅ 1.5...13 mm (¹⁄₁₆ ... ½ ")
∅ 1.5...32 mm (¹⁄₁₆" ... 1⁹⁄₃₂")
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
Battery overheated
Power tool status
Power tool over-
loaded or over-
heated