Completing The Process - CareFusion Pyxis MedStation 4000 User Manual

—
Chapter 3 Setting Up the System
34
Entering medication privileges for temporary users
Medication privileges are associated with temporary users that are added at a
station. When you set up your formulary, you specified a security group for each
medication. Temporary user medication privileges are based on the security group
of the medication.
1. Click the
Med Privileges
NOTE
The Pyxis MedStation system provides 10 default security group names (A-J).
Groups I and J are used with Pyxis Anesthesia System. To rename groups at the
console, select System Setup > Pharmacy Configuration > Security Group
Names.
2. In the Temporary Med User Privileges section, select the groups to which
temporary users can have access at the station.
Users can access override medications whose formulary items and pockets
have the same override group as you select here. If you do not activate any
override groups, temporary users are unable to access override medications.
• To select all groups, click
• To clear all security groups for a particular function, click
3. Complete the steps outlined in the next section, Completing the process.

Completing the process

The following procedure explains how to finish adding a station or other device.
1. After you are finished entering the information on the various tabs, click
2. In the confirmation message that appears, click
tab.
.
All
OK
Pyxis MedStation 4000 System Console User Guide
.
None
Save
.
.