Editing A Scan Code; Deleting A Scan Code; Using Scan Code For A Quick Search - CareFusion Pyxis MedStation 4000 User Manual

Pyxis MedStation 4000 System Console User Guide
4. Click and select the formulary item that you want to associate with
Select Med
the scan code.
5. Specify medication quantity in the Qty field.
NOTE
The National Drug Code (NDC) box is automatically entered if an NDC is
recognized by the system when the scan code is read. You can also manually
enter the NDC in this box. A dialog box appears to confirm that the NDC appears.
If needed, you can enter the NDC code manually.
Scanning the barcode extracts the NDC portion of the barcode. The confirm NDC
value dialog box appears.
6. Click to confirm.
Yes
7. Click .
Save
8. Click .
Close
9. To return to the standby dialog box, click

Editing a scan code

After a scan code is assigned to a formulary item or medication ID in the scan
codes table, you can edit the quantity, vendor name, and scan code fields but not
the medication ID in the record. Vendor field can be left empty.
1. In the menu bar, select
.
Maintenance
2. In the Scan Code dialog box, select the applicable item and click
3. When the Pharmacy Configuration – Scan Code Maintenance dialog box
appears, update the desired field and click
4. To return to the standby dialog box, click

Deleting a scan code

1. In the menu bar, click
.
Maintenance
2. In the Scan Code dialog box, select the applicable item and click
3. In the confirmation message, click
4. To return to the standby dialog box, click

Using scan code for a quick search

Use this feature to determine if a scan code number is already in your system.
1. In the menu bar, click
.
Maintenance
Close
System Setup > Pharmacy Configuration > Scan Code
Save
Close
System Setup > Pharmacy Configuration > Scan Code
to delete the item.
Yes
Close
System Setup > Pharmacy Configuration > Scan Code
Maintaining scan codes
.
.
Edit
.
.
Delete
.
.
127