Adding A Station Or Other Device; Beginning The Process - CareFusion Pyxis MedStation 4000 User Manual

Pyxis MedStation 4000 System Console User Guide

Adding a station or other device

To add a new station or other device to the system, complete the steps outlined in
the following topics.

Beginning the process

The following procedure explains how to start the process of adding a new station
or other device to the system.
1. Select
System Setup > Devices
2. In the Devices dialog box, click
3. In the Device Type Selection dialog box, select the type.
The options are:
• MEDSTN—A station operating in non-profile mode.
• RX—A station operating in profile (Rx) mode.
• ANESTH—An Pyxis Anesthesia System station. Requires the assistance
of a CareFusion representative.
• PROCAR—A computer that facilitates communications between the
console and the facility's information system for ADT, medication
inventory usage, and patient clinical orders (when in profile mode).
• SUPPCONS—A supply console. Customers with Duostation will need to
configure this device type to facilitate synchronization of users.
.
.
Add
Devices
19