—
Chapter 3
Setting Up the System
94
2. In the Area & Nurse Unit Maintenance dialog box, click
If there are more than six nursing units, the Configure Primary NUnits dialog
box appears.
3. In the Available NUnits box, highlight the NUnit you want and click
Doing this moves the unit to the
4. In the
Primary NUnits
Doing this moves the unit to the
5. Click
.
OK
The new unit appears in the Nursing Units section of the Area & Nurse Unit
Maintenance dialog box.
6. To change the auto-discharge time (the default is one year), do the following:
a. Select the nursing unit and click
b. In the Auto Discharge Time dialog box, enter the auto-discharge time in
hours and click
Primary NUnits
box highlight the NUnit and click
Available NUnits
Auto-Discharge Time
.
OK
Pyxis MedStation 4000 System Console User Guide
.
Add Unit
Add
box.
.
Remove
box.
.
.