CareFusion Pyxis MedStation 4000 User Manual page 33

Pyxis MedStation 4000 System Console User Guide
affect the expiration date, the system prompts you to change the
expiration date.
• Return to Stock—Allows users to return unused medications in their
original, unopened packages to the drawer and pocket from which they
were removed. When disabled, return items to the Return Bin. Use the
Formulary menu at the console to assign individual medications the
Return to Stock option.
• Witness Once—Prompts only once for a witness for all the medications
on the list, rather than prompting for a witness on each medication.
• Allergy Information—Displays allergy information at the station. This
information displays only if your facility ADT interface provides allergy
information.
• Waste While Removing—Wastes during the remove process. Prompts
you to confirm whether to administer the full amount.
• Volume Calculation—Allows you to convert strength units to volume
units upon removal of a medication.
• Blind Count—Provides the option to have count verification require you
to enter the quantity blind instead of showing you the expected beginning
count and asking you to confirm or correct it.
• Receives All ADTs—Normally, only the ADT information for a station's
area is sent to a station. If all ADT information is sent to this station,
select this option. Application of this feature might be limited to certain
areas, such as an OR or post-anesthesia care unit (PACU).
• Display Last Access—Transmits throughout the Pyxis MedStation
system to all stations where the patient name is listed. For best
performance, stations that receive all ADT should have Display Last
Access turned off.
• Remove Warning—Displays a dialog box advising you not to remove
the requested medication because it is too early or too late compared to
the order dose time, or too close compared to the previous removal.
• Scanning Required—Allows a facility to require scanning of a
medication scancode during the remove process.
• Undocumented Waste—Allows a facility to track any and all remove
transactions in which a user removes a quantity greater than the ordered
dose.
• Stock Out Bulletins—Allows you to select or deselect the Stock Out
Bulletin and configure the print destination as needed. The Stock Out
Bulletins option is selected by default when enabled in site options and
displays the default destination defined in Site Options. The dropdown
box allows a different printer destination to be chosen.
• Stock Critical Low Bulletins—Allows you to select or deselect the
Stock Critical Low Bulletin and configure the print destination as needed.
The Stock Critical Low Bulletins option is selected by default when
enabled in site options and displays the default destination defined in Site
Options. The dropdown box allows a different printer destination to be
chosen.
Devices
23