Deleting A Batch Report; Enabling Or Disabling A Batch Report; Printing A Batch Report - CareFusion Pyxis MedStation 4000 User Manual

Pyxis MedStation 4000 System Console User Guide
3. Select the applicable options and use the Select buttons to configure each
qualifier.
4. When you are finished updating the customized report options, click
.
Times
5. In the Batch Time Setup dialog box, update the time and days on which the
report should run.
6. If applicable, select a different console or printer where the report is to print.
7. In the box, update the information and click
Comment
8. In the report dialog box, click
The Batch Reports dialog box lists the report that you have set up.
9. To return to the standby dialog box, click

Deleting a batch report

The following procedure explains how to delete batch reports.
1. In the menu bar, select
2. In the Batch Reports dialog box, select the applicable report and click
3. In the confirmation message, click
4. To return to the standby dialog box, click

Enabling or disabling a batch report

You can temporarily disable a batch report if you do not use it often. Disabling a
batch report rather than deleting it is sometimes preferred if the qualifiers it
contains are very specific or complex and would take a substantial time to
redefine.
1. In the menu bar, select
2. In the Batch Reports dialog box, select the applicable report job and click
.
Change Status
This button works as a toggle. It changes the Status from ENABLED to
DISABLED and back again.
3. To return to the standby dialog box, click

Printing a batch report

The following procedure explains how to print a batch report.
1. In the menu bar, select
2. In the Batch Reports dialog box, select the applicable report and click
.
Now
3. In the confirmation message, click
4. To return to the standby dialog box, click
.
Save
Close
Reports > Batch Reports
.
YES
Close
Reports > Batch Reports
Close
Reports > Batch Reports
.
OK
Close
Batch reports
Batch
.
OK
.
.
Delete
.
.
.
.
Print
.
.
179