Report Does Not Include Correct Data - CareFusion Pyxis MedStation 4000 User Manual

—
Appendix A Troubleshooting
190

Report does not include correct data

At the report's heading, check the parameters selected to create the report. Make
sure that all the parameters cover the specific dataset that you intended.
If the report does not include data from the past few hours, change the To time
parameter to NOW. This enters the current time into the time selection and causes
the most current data to print.
If data for a particular station is missing, confirm that communication is current to
that station by following the procedure for troubleshooting communications in
Can't communicate attention notice on page 182. If everything appears current
and the data is still incomplete, contact the TSC.
Pyxis MedStation 4000 System Console User Guide