Changing The Indoor Unit Address Using A Remote Controller; To Select Another System Address - Toshiba MMY-MAP0806HT8P Service Manual

1
Push and hold the TIME
At first, the line 1 and CODE No.
an outdoor unit.)
2
UNIT LOUVER
Push the (left side of the button) and
3
Push the button to confirm the system address selection.
• The address of an indoor unit connected to the selected refrigerant line is indicated on the LCD display and
its fan and louvers are activated.
4
UNIT LOUVER
Push the button (left side of the button). Each time you push the button, the indoor unit
numbers of the selected refrigerant line are indicated one after another.
• Only the fan and louvers of the indicated indoor unit are activated.

To select another system address

5
Push the button to return to step
• After returning to step
6
Push the button to finish the procedure.

Changing the indoor unit address using a remote controller

To change an indoor unit address using a wired remote controller.
The method to change the address of an individual indoor unit (the indoor unit is paired with a wired
remote controller one-to-one), or an indoor unit in a group.
(The method is available when the addresses have already been set automatically.)
(Execute it while the units are stopped.)
1
Push and hold the
(If 2 or more indoor units are controlled in a group, the first indicated UNIT No. is that of the head unit.)
2
UNIT LOUVER
Push the button (left side of the button) repeatedly to select an indoor unit number to
change if 2 or more units are controlled in a group. (The fan and louvers of the selected indoor
unit are activated.)
(The fan of the selected indoor unit is turned on.)
3
Push the TEMP.
and buttons at the same time for more than 4 seconds.
(Address Change) are indicated on the LCD display. (Select
2
.
2
, select another system address and check the indoor unit addresses of the line.
SET DATA SETTING
TEMP.
3
TIMER SET
5
FILTER
RESET TEST SET CL
8
Finish
1
, , and buttons at the same time for more than 4 seconds.
/ buttons repeatedly to select
SWING/FIX
buttons repeatedly to select a system address.
CODE No.
UNIT No.
R.C. No.
ON / OFF
TIME
2, 6, 7
for CODE No..
− 121 −
4