Led Indicators Instructions - Pylontech US2000 Product Manual

Dry Contact Terminal
Dry Contact Terminal: provided 1 way input and 3 ways output dry contact signal.
LED Status Indicators
 RUN Lamp (No.6 Figure 2-1): green, long lighting when charging and flash when
discharging;
 ALM Lamp (No.7 Figure 2-1 7): red, flashes when alarm and long bright if equipment failure
or protected;
 Battery capacity indicator (No.8 Figure 2-1): 6 green lamps, each light represent 16.6%
capacity.

LED Indicators Instructions

Protect
Battery ion /
Statues Alarm /
Normal
Shut
Down
Standby Normal Flash1
Normal
Charge
Protection
Normal Flash3
Discharge
Protection
Note: The flashing instructions, flash 1 - light 0.25s / off 3.75 seconds; flash 2 - 0.5s light / 0.5s
off; flash 3 - 0.5s light / 1.5s off
09
RUN ALM
● ● ●
Off Off Off
Off Off
Light Off
Off Light Off
Off
Off Light Off Off
Capacity LED
● ● ● ●
Off Off Off Off
Off Off Off Off
Based on capacity
Off Off Off Off
Based on capacity
Off Off Off
Descriptions
●
Off All off
Indicates
Off
Standby
The highest
capacity indicator
LED flashes
(flash 2), others
lighting
Stop charging,
Off
ALM lighting
Indicate based
on capacity
Stop discharging,
Off
ALM lighting
16BISV0903