Control Surface - VQ Model SBD-5 DAUNTLESS Instruction Manual

26- Balance
(128 ~ 133mm)

27- Control surface

ELEVATOR STROKE
RUDDER STROKE
Adjust the travel of the control surfaces to achieve the values stated in the diagrams.
These value will be suitable for average flight requirements. Adjust the values to suit your particular needs.
IMPORTANT: Please do not clean your model with strong solvent or pure alcohol, only use kerosene to keep the
colour of your model not fade.
Note: Adjust the location of the battery pack to achieve this C.G location.
Wing center section
(15mm)
(15mm)
(25mm)
CENTER FLAP STROKE
(25mm)
RIGHT&LEFT BRAKE STROKE
RIGHT&LEFT FLAP STROKE
DO NOT try to fly an out-of balance model!
AILERON STROKE
(20mm)
(20mm)
(40mm)
(40mm)
(40mm)