Figure 4-98 Configuring The Crypto Service Class; Figure 4-99 Creating 802.1X Domain Abc; Figure 4-100 Creating The Wlan-Bss Interface - Huawei EGW2100 Web Configuration Manual

HUAWEI EGW2100
Web Configuration Guide
5.
6.
7.
Step 4 Configure the binding between the service class and the WLAN-BSS interface.
1.
2.
Issue 01 (2010-02-20)

Figure 4-98 Configuring the crypto service class

Select the check box to the left of Advanced Config. The advanced configuration interface
is displayed. Figure 4-99

Figure 4-99 Creating 802.1X domain abc

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click ENABLE corresponding to service class number 2. Click OK in the Are you sure
to enalbe? dialog box that is displayed, and click OK in the Info: Service-class 2 is enabled
successfully! dialog box that is displayed to complete the configuration.
Choose NetWork > Wlan > Radio Setting. The Radio Setting page is displayed.
Click New Bss in the Wlan Bss group box to access the Interface Basic Config interface.
Figure 4-100 shows the parameter setting.

Figure 4-100 Creating the WLAN-BSS interface

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Internetworking
shows the parameter setting.
4-45