4.3 Configuration Example Of Dhcp Server; Figure 4-20 Saving The Configuration - Huawei EGW2100 Web Configuration Manual

4 Configuration Example of the Internetworking
3.
Step 6 Save the configuration.
1.
2.
----End

4.3 Configuration Example of DHCP Server

The locations and number of terminals in the network change frequently, so you need to use the
Dynamic Host Configuration Protocol (DHCP) to allocate dynamic IP addresses to the terminals.
The EGW2100 can serve as a DHCP server to offer IP addresses to the DHCP client.
Networking Requirements
A DHCP server dynamically assigns the IP addresses to a client in the same network segment.
The address pool segment 10.1.1.0/24 is divided into two segments: 10.1.1.0/25 and
10.1.1.128/25. The two network segments are in the Trust zone.
The IP addresses of the two Ethernet interfaces on the DHCP server are 10.1.1.1/25 and
10.1.1.129/25.
The IP lease of the segment 10.1.1.0/25 is 10 days and 12 hours, with domain name as
dhcpserver.com, DNS address as 10.1.1.2, egress device address as 10.1.1.126 and without the
NetBIOS address.
The IP lease of the segment 10.1.1.128/25 is 5 days, with DNS address as 10.1.1.2, egress device
address as 10.1.1.254, and NetBIOS address as 10.1.1.4.
Networking Diagram
Figure 4-21
4-10
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click Save on the upper right of the page to save the configuration.
parameter setting.

Figure 4-20 Saving the configuration

Click OK in the This will save current configuration, if you switch to other pages, you
will not get the operation result. Are you sure to save? dialog box that is displayed to
complete the configuration.
shows the networking for configuring the DHCP server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HUAWEI EGW2100
Web Configuration Guide
Figure 4-20 shows the
Issue 01 (2010-02-20)