Figure 8-20 Configuring The Ipsec Policy Template; Figure 8-21 Configuring The Ipsec Policy; Figure 8-22 Applying The Policy - Huawei EGW2100 Web Configuration Manual

8 Configuration Example of the VPN
5.
6.
7.
Step 8 Save the configuration.
1.
8-12

Figure 8-20 Configuring the IPSec policy template

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose IPSec Policy tab, then click new. The IPSec Policy page is displayed.
8-21 shows the parameter setting.

Figure 8-21 Configuring the IPSec policy

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration. Apply the policy on Ethernet 0/0/0,
parameter setting.

Figure 8-22 Applying the policy

NOTE
The policy should be applied on the upstream interface of the obtained IP address. For example, when
the 3G uplink is adopted, the policy should be applied on the Dialer interface.
Click Save on the upper right of the page to save the configuration.
parameter setting.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HUAWEI EGW2100
Web Configuration Guide
Figure
Figure 8-22 shows the
Figure 8-23 shows the
Issue 01 (2010-02-20)