Figure 4-48 Configuring The Ppp User On The Dialer0 Interface; Figure 4-49 Configuring Circular Dcc - Huawei EGW2100 Web Configuration Manual

4 Configuration Example of the Internetworking
10. Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
11. Click back. Then return to the Interface Dialer0 Config interface.
12. In the Dial Control Center group box, click DCC Configuration. The DCC
13. Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
Step 4 Configure the Cellular5/0/0 interface.
1.
2.
3.
4-24

Figure 4-48 Configuring the PPP user on the Dialer0 interface

to complete the configuration.
Configuration interface is displayed.
CAUTION
You can obtain the Peer Number from the operator.

Figure 4-49 Configuring circular DCC

to complete the configuration.
Choose NetWork > Interface. The Interface page is displayed.
Click MORE corresponding to Cellular5/0/0 to enter the Cellular5/0/0 Interface
Config interface.
In the PPP User and Dialer group box, click PPP User and Dialer. The PPP User
Config interface is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-49 shows the parameter setting.
Figure 4-50 shows the parameter setting.
HUAWEI EGW2100
Web Configuration Guide
Issue 01 (2010-02-20)