Figure 4-10 Enabling The Dhcp Function; Figure 4-11 Configuring The Processing Mode For Dhcp Packets On The Interface; Figure 4-12 Enabling The Dns Proxy - Huawei EGW2100 Web Configuration Manual

4 Configuration Example of the Internetworking
2.
3.
4.
Step 9 Configure the DNS.
1.
2.
3.
4-6
In the DHCP Basic Config group box, select the DHCP Enable check box. Click OK in
the Are you sure to enable? dialog box to enable the DHCP function.
the parameter setting.

Figure 4-10 Enabling the DHCP function

In the Setting Interface Process Mode Of DHCP Packet group box, configure the
processing mode for DHCP packets on Ethernet0/0/0.
setting.

Figure 4-11 Configuring the processing mode for DHCP packets on the interface

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose NetWork > DNS Config. The DNS Config page is displayed.
Click the Basic Configurations tab. Select the Enable DNS Proxy check box to enable
the DNS proxy function.

Figure 4-12 Enabling the DNS proxy

Click the DNS Server Address tab. Choose the interface Dialer1,
parameter setting.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-12 shows the parameter setting.
HUAWEI EGW2100
Web Configuration Guide
Figure 4-10
Figure 4-11 shows the parameter
Figure 4-13
Issue 01 (2010-02-20)
shows
shows the