HUAWEI EGW2100
Web Configuration Guide
8.
Step 3 Configure the interzone packet filtering rule.
1.
2.
3.
Step 4 Configure the function of filtering application layer-based FTP packets on the EGW2100.
1.
Issue 01 (2010-02-20)
Figure 6-3 Configuring advanced ACL rule 5
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose Security > Packet-Filter. The Packet-Filter page is displayed.
Click MORE corresponding to dmz-untrust. The Packet-Filter Config page is displayed.
Set the parameters based on
Figure 6-4 Configuring the packet filtering rule between the DMZ security zone and the
Untrust security zone
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose Security > ASPF and then click InterZone ASPF. The ASPF Config page is
displayed. Set the parameters based on
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
6-4.
Figure
6-5.
6 Configuration Example of NAT
6-3