HUAWEI EGW2100
Web Configuration Guide
5.
Step 5 Configure the packet filtering rule.
1.
2.
3.
Step 6 Configure the NAT.
1.
2.
3.
Issue 01 (2010-02-20)
Figure 4-85 Configuring interface Wlan-Bss2
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose Security > Packet-Filter. The Packet-Filter page is displayed.
Click MORE corresponding to trust-untrust. The Packet-Filter Config page is displayed.
Figure 4-86
shows the parameter setting.
Figure 4-86 Configuring the interzone packet filtering rule
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Create ACL 3001 and configure the rule for ACL 3001: Match all IP packets.
For the configuration procedure, see
Choose Service > NAT > Nat-Policy. The Nat-Policy page is displayed.
Click new to enter the NAT-Policy interface.
Figure 4-87 Configuring the NAT
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Internetworking
3 Configuration Example of the Basic
Figure 4-87
shows the parameter setting.
Operation.
4-39