Figure 4-46 Adding The Dialer0 Interface To The Untrust Zone; Figure 4-47 Obtaining The Ip Address In Ppp Negotiation Mode - Huawei EGW2100 Web Configuration Manual

HUAWEI EGW2100
Web Configuration Guide
3.
4.
5.
6.
7.
8.
9.
Issue 01 (2010-02-20)
Figure 4-45 Creating interface Dialer 0
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click MORE corresponding to Dialer0 to enter the Interface Dialer0 Config interface.
Figure 4-46 shows the parameter setting.

Figure 4-46 Adding the Dialer0 interface to the Untrust zone

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
In the Interface Basic Config group box, click IP Address Detail Config. The IP Address
Config interface is displayed.

Figure 4-47 Obtaining the IP address in PPP negotiation mode

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click back. Then return to the Interface Dialer0 Config interface.
In the PPP User and Dialer group box, click PPP User and Dialer. The PPP User
Config interface is displayed.
CAUTION
Configure access authentication (according to the actual networking).
l
The corresponding authentication configuration on the physical interface (Cellular) is
l
required.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Internetworking
Figure 4-47 shows the parameter setting.
Figure 4-48 shows the parameter setting.
4-23