Figure 8-7 Configuring The Tunnel1 Interface; Figure 8-8 Configuring The Static Route - Huawei EGW2100 Web Configuration Manual

HUAWEI EGW2100
Web Configuration Guide
5.
6.
7.
8.
9.
Issue 01 (2010-02-20)

Figure 8-7 Configuring the tunnel1 interface

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose NetWork > Route Config.
Click the Route-Static tab. Click New. The Route-Static Config page is displayed. Set
the parameters based on

Figure 8-8 Configuring the static route

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click New. The Route-Static Config page is displayed. Set the parameters based on
8-9.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 8-8.
8 Configuration Example of the VPN
Figure
8-5