Figure 4-71 Configuring The Ethernet 0/0/0 Interface; Figure 4-72 Creating Acl 3001 - Huawei EGW2100 Web Configuration Manual

HUAWEI EGW2100
Web Configuration Guide
11. Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
Step 4 Configure the Ethernet 0/0/0 interface.
1.
2.
3.
Step 5 Configure the NAT rule, the routing rule, and the packet filtering rule.
1.
2.
3.
4.
Issue 01 (2010-02-20)
to complete the configuration.
Choose NetWork > Interface. The Interface page is displayed.
Click MORE corresponding to Ethernet0/0/0 to enter the Ethernet0/0/0 Interface
Config interface. Figure 4-71

Figure 4-71 Configuring the Ethernet 0/0/0 interface.

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose Resource > ACL. The ACL page is displayed.
Click New to enter the ACL Basic Config interface.
setting.

Figure 4-72 Creating ACL 3001

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click New to enter the Rule Config interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Internetworking
shows the parameter setting.
Figure 4-72
Figure 4-73
shows the parameter
shows the parameter setting.
4-33