4.1 Configuration Example Of Adsl By Using Pppoe; Figure 4-1 Networking Of The Adsl Configuration Example; Figure 4-2 Configuring The Adsl Interface - Huawei EGW2100 Web Configuration Manual

4 Configuration Example of the Internetworking

4.1 Configuration Example of ADSL by Using PPPoE

Networking Requirements
The EGW2100 connects to a LAN through Ethernet 0/0/0 and LAN users access the Internet
through the ADSL interface (ATM 2/0/0).
Networking Diagram
Figure 4-1

Figure 4-1 Networking of the ADSL configuration example

Procedure
Step 1 Configure an IP address for Ethernet 0/0/0 and add Ethernet 0/0/0 to the Trust zone.
For the configuration procedure, see
Step 2 Create Virtual-Ethernet 1 (VE 1) interface and add VE 1 to the Untrust zone. Create Dialer 1
interface and add Dialer 1 to the Untrust zone.
For the configuration procedure, see
Step 3 Configure the ADSL interface.
1.
2.
3.
4-2
shows the networking of the ADSL configuration example.
Ethernet 0/0/0
192.168.1.1/24
Choose NetWork > Interface. The Interface page is displayed.
Click MORE corresponding to Atm2/0/0 to enter the Interface Basic Config interface.
Figure 4-2 shows the parameter setting.

Figure 4-2 Configuring the ADSL interface

Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ATM 2/0/0
EGW DSLAM
3 Configuration Example of the Basic
3 Configuration Example of the Basic
HUAWEI EGW2100
Web Configuration Guide
PPPoE Server
Operation.
Operation.
Issue 01 (2010-02-20)