Adding Printer - Huawei B315 Quick Start Manual

Optional: Adding a printer
Take a computer with Windows 7 operating system as an example.

If the external USB printer cannot be used, please consult the printer manufacturer

whether this method is supported.
1. Install the printer's driver in your computer, and then connect the computer and the
B315 via wired way or Wi-Fi way.
2. Connect printer to the B315 with USB cable and then power on them.
3. Log in to web management page, and choose Settings > Advanced > Storage
Services.
4. Check the Enable samba, and click Apply.
5. Click Add, to configure the parameters as follows.
User name/Password: Follow the page to enter username and password. When

accessing Samba, you need to input these parameters to login.
Right: Select Read only or Read/Write.

Directory: Click Browse and select the root directory of the printer.

6. Choose Start > Run, enter the default IP address of the B315: http://192.168.8.1,
and then press Enter.
7. In the shown dialog box, enter the username and password you have configured on
the Storage Services page to access to the Samba service.
8. Double click the printer icon in the window, follow the wizard and select the
corresponding printer driver to add a printer. Wait a few minutes for the settings to
take affect.
9. Check the status of printer from Control Panel, printer window. Status should be
shown ready. Now you can use the printer.
6