Factory Reset Menu - RGBlink CP 3072PRO User Manual

Show the version of COM, PVW MCU, PVW FPGA, PST+PGM MCU,
Version PST+PGM FPGA, Optional In 1 MCU, Optional In 2 MCU and Optional In 3
MCU.
Enable or disable the network function. If select "ON", user can set the IP
Ethernet
address, subnet mask and gateway.
Step 1: Push the T-BAR to the top.
Step 2: Choose ON.
T-BAR Calibration
Step 3: Push the T-BAR to the bottom.
Step 4: Choose ON.
Test Enable or disable the LED test function and adjust the key value.

3.3.9 Factory Reset Menu

->Factory Reset
Factory Reset Select "YES" or "NO". Select "YES" to restore default settings.
Factory Reset, Select "YES" or "NO". Select "YES" to restore default settings, but keep the
Save IP IP.
CP 3072PRO
Factory Reset, Save IP
User Manual
Chapter 3: Using Your Product
>>
>>
26