Solving Audio Problems - HP ProDesk 600 G3 Maintenance And Service Manual

Fuzzy focus; streaking, ghosting, or shadowing effects; horizontal scrolling lines; faint vertical bars; or unable to center the
picture on the screen (flat panel monitors using an analog VGA input connection only).
Cause
Graphics card is not seated properly or is bad (some models).
Certain typed symbols do not appear correct.
Cause
The font you are using does not support that particular symbol.

Solving audio problems

If the computer has audio features and you encounter audio problems, see the common causes and solutions
listed in the following table.
Headset microphone connected to the front is not working or is very quiet.
Cause
The front Headset connector supports CTIA (Cellular Telephone
Industries Association) style headsets and not OMTP (Open Mobile
Terminal Platform) style headsets. These differ by the
microphone connections.
Sound cuts in and out.
Cause
Processor resources are being used by other open applications.
Sound does not come out of the speaker or headphones.
Cause
Software volume control is turned down or muted.
Solution
with the synchronization, go to the following Web site,
select the appropriate monitor, and download either
SP32347 or SP32202: http://www.hp.com/support
1. Reseat the graphics card.
2. Replace the graphics card.
Solution
Use the Character Map to locate and select the appropriate
symbol. You can copy the symbol from the Character Map into a
document.
In Windows 7, click Start, select All Programs, select Accessories,
select System Tools, and then select Character Map.
In Windows 10, type ch in the taskbar search box, and then select
Character Map from the list of applications.
Solution
Make sure that a CTIA style headset is being used or use an OMTP
style headset with a commercially available adapter that converts
an OMTP headset to the CTIA pinout.
Solution
Shut down all open processor-intensive applications.
Solution
Double-click the Speaker icon on the taskbar, then make sure
that Mute is not selected and use the volume slider to adjust the
volume.
Solving audio problems 89