Memory - HP ProDesk 600 G3 Maintenance And Service Manual

Memory

Description
16-GB, PC4-2400
8-GB, PC4-2400
4-GB, PC4-2400
2-GB, PC4-2400
The computer comes with double data rate 4 synchronous dynamic random access memory (DDR4-SDRAM)
dual inline memory modules (DIMMs).
The memory sockets on the system board are populated with at least one preinstalled memory module. To
achieve the maximum memory support, you can populate the system board with up to 64 GB of memory
configured in a high-performing dual-channel mode.
For proper system operation, the DIMMs must adhere to the following specifications:
● Industry-standard 288-pin
● Unbuffered non-ECC PC4-19200 DDR4-2400 MHz-compliant
● 1.2 volt DDR4-SDRAM memory modules
CAS latency 17 DDR4 2400 MHz (17-17-17 timing)
●
● Mandatory JEDEC SPD information
The computer supports the following:
● 512 Mb, 1 Gb, 2 Gb, and 4 Gb non-ECC memory technologies
● Single-sided and double-sided memory modules
● Memory modules constructed with x8 and x16 DDR devices; memory modules constructed with x4
SDRAM are not supported
NOTE: The system does not operate properly if you install unsupported memory modules.
26 Chapter 4 Removal and replacement procedures: Small Form Factor