Avtech room alert 4e User Manual And Reference Manual page 40

Room Alert 4E
• Your Room Alert 4E can immediately send an update to Device ManageR when it
detects an alarm, regardless of any intervals you have configured either in this section
or in the Device ManageR discovery interval.
To enable Push to Device ManageR from your Room Alert 4E:
1. Select Enable Device ManageR Push.
2. In "Server IP Address," enter the IP address of Device ManageR's host system.
3. In "Server Port," enter the port Device ManageR uses. The default is 8080.
4. In "Push Interval," choose the number of minutes you would like between pushes from
the drop-down list.
5. Click Accept Changes
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
6. Click Save Settings
will automatically reboot and commit your changes.
Time & Date Configuration
You may set the time and date defaults for your Room Alert 4E here.
36
at the bottom of your screen to temporarily save your settings.
in the navigation bar to the left of your screen. Your Room Alert
AVTECH Software, Inc.