Network - Avtech room alert 4e User Manual And Reference Manual

Network

Settings
Navigate to
Device Name
To rename your Room Alert 4E:
1. Select the automatically-assigned name in "Device Name" and enter a new one of up to
15 alphanumeric characters.
Accept Changes
2. Click
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
Save Settings
3. Click
will automatically reboot and commit your changes.
IP Address Configuration—DHCP
To obtain an IP address automatically using DHCP:
Obtain IP Address
1. Select
2. Typically, leave "Auto Configuration Methods" at the default, with "BOOTP," "DHCP"
and "AutoIP" enabled.
Accept Changes
3. Click
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
AVTECH Software, Inc.

Network
to open the Network Settings screen.
at the bottom of your screen to temporarily save your settings.
in the navigation bar to the left of your screen. Your Room Alert
Automatically.
at the bottom of your screen to temporarily save your settings.
Room Alert 4E
15